WAGNER 0530010 Manuel d'instructions télécharger pdf (Page 12)

English

Storage / Maintenance

You will need:

• Petroleum jelly

• An old toothbrush or other similar cleaning brush

Cleaning and Storage Tips:

• Wrap the paint hose around the extension

holder and rest the roller arm assembly on the

pump underneath the suction tube for easy

storage.

• Keep water, paint, and other residues away from

the handle button. A clogged handle button

will aect the performance of your unit.

• Be sure that your unit is free from all uids

before storage. After storing your unit in

extreme cold temperatures, allow unit to reach

room temperature before using.

• When storing your unit, be sure the paint hose

is stored in a large loop without any kinks. If it is

bent, it could be damaged.

IMPORTANT: Store the unit indoors with the

power cord wrapped safely around the pump.

This unit contains no serviceable

electrical parts. Do not attempt to

service the unit yourself.

Maintenance

The areas on the roller handle indicated below must

be cleaned thoroughly and lubricated after each use.

ALL paint should be removed from the areas

highlighted in gray below, especially the quick-

release tabs and all other areas that connect

with other parts. This can be done by using the

appropriate cleaning solution and an old toothbrush.

Quick-release tabs

Connecting area

IMPORTANT: Do not submerge roller handle.

In addition to thoroughly cleaning your unit after

every use, you must clean and lubricate the areas on

the roller arm indicated below. Use a thin layer of

petroleum jelly to lubricate the indicated areas.

Proper lubrication will prolong O-ring and seal life,

and keep your unit functioning smoothly.

O-ring

Connec

ting

area

Seal

Connecting area

Reassembly

When all of the components have been throughly

cleaned, dried, and lubricated, you can now

reassemble the roller assembly and roller arm for

storage.

1. Reassemble the cap and core into the roller

cover.

2. Reattach the roller assembly (cap, core and

cover) to the roller arm.

3. Press the quick-release tabs on the roller handle

and attach the the roller assembly to the roller

handle.

1 2 ... 7 8 9 10 11 12 13 14 15 16

Commentaires sur ces manuels

Pas de commentaire

WAGNER 0530010 Manuel d'instructions Page 12

Commentaires sur ces manuels