WAGNER GA 400AL Manuel de service télécharger pdf (Page 26)

GA 2800EA, GA 2805EA



"?

"?



OPERATING MANUAL

EDITION 12/2008

PART NO. DOC350731

5.3.2 PREPARATION

➞ Earthing the spraying system and make sure that all other conductive parts within the

work area are earthed.

➞ Secure the spray gun to the lifting unit with the suspension bracket or suspension bolt

(accessories)

➞ Connect material hose to pump.

➞ Connect the air hose ø 10 mm; ø 0.39 inches (marked blue) to oil-free, dry air supply

(approx 0.25 MPa; 2.5 bar; 36.3 psi with regulator.

➞ Connect the air hose ø 8 mm; ø 0.31 inches (marked red) for the control air to the

control unit EPG 3000.

➞ When using ﬂ at jet nozzles: Connect the air hose ø 8 mm; ø 0.31 inches (marked green)

for the fan air to the control unit EPG 3000.

➞ Connect electrical cable to the control unit.

➞ Visually check the permissible pressures for all the system components.

➞ Set material pressure and use a suitable medium (solvent or water) to check that

connections do not leak.

➞ Relieve system pressure and spray gun.



7!2.).'

3PARKSFORMWHENTHEPLUGISREMOVED

%XPLOSIONHAZARD

7HENUSINGTHESPRAYGUNINEXPLOSIONHAZARDAREAS

 3ECURE THE CABLE CONNECTION WITH THE SUPPLIED LOCKINGCLAMP



3)()??'"

Old equipment

New equipment

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 51 52

Pas de commentaire

WAGNER GA 400AL Manuel de service Page 26