WAGNER 9190 Manuel du propriétaire télécharger pdf (Page 15)

English

1. Lock the gun and remove spray tip assembly. Submerge

suction set into a bucket with appropriate cleaning

solution.

2. Place a waste container next to the original material

ontainer. Aim the spray gun into the side of the

riginal

material container

and hold the trigger.

Bucket with

cleaning

solution

3. While pulling the gun trigger, turn the pump ON (l), and turn

the PRIME/ SPRAY knob to SPRAY to purge material from

the hose back into the original container.

• Hold trigger

• Turn pump ON (l)

• Turn PRIME/SPRAY knob to SPRAY

Containers should

be touching

Original

material

container

Hold trigger

Waste

container

Move on to Cleaning the Suction Set.

4. When cleaning solution flows from the spray gun, keep

holding the trigger and aim the spray gun into the side of the

waste container

(ground gun with a metal container if

flushing with flammable solvent).

5. Trigger the gun until the fluid flowing out of the gun is

clear. You may need to dispose and obtain new cleaning

solution.

Turn the PRIME/SPRAY knob to PRIME and trigger gun

to relieve pressure.

Spray material into

original container

Spray cleaning solution

into waste container

Hold trigger

Keep holding trigger through next steps.

Cleanup - Oil-based materials

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 27 28

Commentaires sur ces manuels

Pas de commentaire

WAGNER 9190 Manuel du propriétaire Page 15

Commentaires sur ces manuels

Produits connexes et manuels pour Pulvérisateur de peinture WAGNER 9190