WAGNER 9190 Manuel du propriétaire télécharger pdf (Page 20)

English

(a)

1. Remove the suction set. 2. Unscrew the inlet valve assembly (a) from the sprayer.

Visually inspect the inside and outside of the inlet valve

ssembly. Clean any paint residue with the appropriate

leaning solution.

Cleaning or servicing the inlet valve may be required if the unit has priming problems. Priming problems may be

revented by properly cleaning the sprayer and following the long-term storage steps.

If priming problems persist, you may need to replace the

inlet valve assembly

. Call Customer Service to order a

new inlet valve assembly

3. Lubricate the O-ring on the inlet valve (b). Replace inlet

valve assembly by screwing it into the sprayer. Torque to

23-27 ft lbs (9140, 9146, 9150) or 32-38 ft lbs (9170, 9190).

4. Replace suction set and hand-tighten.

(b)

Cleaning the Inlet Valve

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 26 27 28

Pas de commentaire

WAGNER 9190 Manuel du propriétaire Page 20