WAGNER CONTROL SPRAY Manuel du propriétaire télécharger pdf (Page 5)

Spraying Methods

Air-Assisted Airless

Electrostatic Spray

Air-assisted airless sprayers offer fine finish capabilities combined with

a medium production rate. Air-assisted technology uses a combination of

airless and air spray. Fluid pressure ranges from 700 to 900 PSI, with air

intermixed at 15 to 30 PSI. The systems typically are found in stationary

and portable fine finish production applications. Transfer efficiency for

air-assisted airless ranges from 40 to 65%.

Electrostatic spray systems charge the paint at the tip. The charged particles

move within the electrostatic field, which is attracted to the grounded object,

forming an even coating on its entire circumference. When used properly, the

result can be high transfer efficiency with uniform mil thickness.

A variety of electrostatic systems are available, including conventional airless

and air-assisted. Applications include chain link fences, wrought iron, lockers,

and metal office furniture.

When to use HVLP Equipment

HVLP equipment is classified as a finishing tool. It is not designed to be used

for covering large, flat surfaces, except when using specialty coatings, such as

multi-spec, or where overspray may be hazardous.

HVLP systems are designed to cut labor time, minimize waste, and improve

the final finish on the substrate. In addition to enhancing profitability, in

many states HVLP is compliant with the most stringent transfer efficiency

requirements. For this reason, you can expect the HVLP sprayer market will

continue to grow at an accelerated pace.

HVLP Applications Include:

HVLP Features:

Touch-up

Dentil molding

Crown molding

Cabinets

Door jambs

Elevator doors

Frames

Bi-fold doors

Implement equipment

Six-panel doors

Appliances

Porcelain

Furniture

Lockers

Shutters

Dividers

Gutters

General maintenance

Wicker furniture

Shelving

Pipes

Multi-color finishes

Louvered doors

Overhangs

High transfer efficiency

Minimal bounceback

Sprays most materials

Reduced prep and clean-up

Affordable

Inexpensive to maintain

Controlled spraying

Portability

Reduces material consumption by 40%

Three spray patterns available

Works from 15-amp service

Cuts labor time

Sprays patterns from

" to 12"

Low fluid pressure means low wear

Moisture-free atomizing air

1 2 3 4 5 6 7 8 9 10 ... 29 30

Commentaires sur ces manuels

Pas de commentaire

WAGNER CONTROL SPRAY Manuel du propriétaire Page 5

Commentaires sur ces manuels

Produits connexes et manuels pour Pulvérisateur de peinture WAGNER CONTROL SPRAY