WAGNER FORCE TEN Spécifications télécharger pdf (Page 2)

IMPORTANT

READ THIS BEFORE USING THE FORCE FIVE

1. CAUTION: EXCESSIVE OVERLOADS, over 25% above maximum

capacity, or IMPACT LOADING may cause permanent damage

to the load cell. EXERCISE CAUTION to prevent overloading or

impact loading.

2. CAUTION: The FDV 5 and FDV 10 models, 5 lb and 10 lb

respectively, are extremely easy to overload. Use special

caution to prevent overload damage.

3. CAUTION: In order to prevent accidental overloads, the capacity

on the battery cover must correspond to the capacity of the

Force Cell Module (FCM) in use. When changing the FCM,

remember to change to the matching battery cover supplied

with each FCM.

4. CAUTION: When "HELP" is displayed it may indicate either:

• Force Cell Module is not securely connected.

• Force Cell Module has been overloaded and is damaged.

Call Wagner Instruments for instructions.

5. CAUTION: Switch FDV power off prior to disconnecting power

supply (battery or battery eliminator); not doing so may result in

losing menu and auto-calibration settings.

6. CAUTION: "LoAd" will appear on the display when the gage is

first activated if the gage has been disconnected from the

battery or AC power for an extended period of time, and the

set-up menu has reverted to default settings. User must reset

"LoAd" (see Section F.) and should check other menu settings

before testing to assure that previously selected values are as

desired. The FDV cannot be shut off in this mode until a value

for "LoAd" has been selected.

1 2 3 4 5 6 7 ... 29 30

Pas de commentaire

WAGNER FORCE TEN Spécifications Page 2